技術規范:
|
Raw Material
|
Thickness
|
Width
|
Speed
|
Coating Thickness
|
Energy
|
|
CR/GI/GL/AL
|
0.13-1.5mm
|
500-1800mm
|
30-120m/min
|
8-25 μm
|
Gas/LPG/steam/ electricity
|
Primer coating: epoxy resin, polyester, polyurethane
Finish coating: polyester, fluorocarbon, silicone polyesters，polyurethane
Characteristic:
a. The whole line process layout is compact
b. Tension of all process zone design reasonable, guarantee coating thickness precision control △≤5, improve qualified product percentage
c. Finish coater select two head design type, this design is advanced and change color quickly during the running, simple operation, meanwhile save foundation cost
d. Set stitching seam automatic tracking, protect the coating roll from damage
e. Low consumption GAS consumption is lower than 8 m3/ton (calculated according to 0.34X1220mm, speed 120m/min, 2C2B，total dry film thickness 23-28um)
f. Environment friendly
g. Waste-heat recovery and utilization
h. Exhaust gas equip with LEL detection system, to ensure safety production
i. Equip with online Knurling device and cold/hot laminator if you require, color precision ≤0.5mm
CCL GUANGDONG FOSHAN
0.18-0.8mm 600-1250mm 120,000T/year
CCL GUANGDONG FOSHAN
0.18-0.8mm 600-1250mm 120,000T/year
CCL SHANDONG LONGFA
0.15-1.0mm 800-1250mm capacity 100,000T/year
CCL WITH PRINTING SHANDONG LONGFA
0.3-1.2mm 900-1280mm Capacity:70,000T/year